PROJECT F-18

HOME Project F-18 Craig's Hangar Craig's Work Shop Eclipse Page Links Pictures of the Dog

Page#1  Updated 1/30/01 

Page#3  Updated 11/5/02

UPDATE: 1/30/01

All the flying surfaces have been glued on. The front steering is done. If you look at the pictures below you can see I used a tray system to hold the front steering servo in. This allows an easy way to remove the servo from the plane. There is a plate that is installed with two screws to hold the tray from coming out. There are also some pictures of where I mounted the air tanks. One for the retracts and one for the brakes. Cockpit pictures

UPDATE: 01/5/01

 All the flying surfaces are fiberglassed. Preparing all fiberglass for paint.  Hopefully it will be ready to paint in three weeks. I will have updated pictures soon.

UPDATE: 11/7/00

 I have cut out the ailerons, flaps and rudders. I am very close to fiberglassing the flying surfaces. The radio tray is done. I am using a BVM smooth stop for the brakes. One draw back is that the yellow brakes take a lot more air then BVM's brakes.